FAQS

At iScooter Electric we are passionate about providing dedicated customer support, so you get total peace of mind with every electric scooter.

Q1.How long does it take to deliver?
The United States delivery time is 2–5 business days. We are working hard to ensure all orders arrive in a prompt and timely manner.

Countries  Shipping Time   Ship By
Western United States 2-4 Business Days UPS / FEDEX
Eastern United States  3-5 Business Days UPS / FEDEX


Q2:The front light and screen will be automatically shut off?
A:To save and protect the battery, when the scooter is stationary for 5-10 minutes, it will automatically enter power-save modes and turn off.


Q3:Unable to accelerate?
A:1. For your safety, by default, this is a built-in safety feature, "Non-zero startup", it only needs one initial speed to start. 2. Error code (visible on LCD), please contact us to replace a throttle.


Q4:Motor hall Faults?
A:Take off the screws on the bottom of the scooter, then check the controller and replug the hall wire connecting terminal.


Q5:Controller Faults?
A:Take off the screws on the bottom of the scooter, then check and replug the controller connecting terminal.


Q6:Unable to power on?
A:1. Unplug your charger from the port, then click the power button to turn on your scooter. 2. Use the multimeter to measure the voltage of the battery, if the voltage is from 30-42V, it means there is no problem with the battery. If the voltage is lower than 30V, the scooter may not turn on.


Q7:Not charging?
A:1. Check your charging cable and charging port for signs of damage, like breakage. Don't use damaged accessories. 2. Use the 220V ACA of the multimeter to measure the voltage of the charger and charger port, if there is no reading, your scooter probably needs to replace the charger or charger port. if there is a reading, the battery may need to be replaced.


Q8:Scooter seems to make noise?
A:It may be the disc brake noise. To remove the disc brake noise:First make sure the scooter is turned off. 1. Loosen two screws on the pump (not the screw on the rocker). 2. Adjust the position of the brake caliper to ensure that the brake disc is in the middle of the two brake pads. 3. Keep the brake disc and brake pad not touching each other. 4. Hold the disk brake pump in the desired position, then retighten the screws to the pump. Or contact customer service to get an operation video.


Q9:The speed and range are not as described?
A:Actual speed and range may vary depending on ambient temperature, road conditions, rider weight, and the weight of any additional cargo.